NATATORIUM & CHLORINE ROOMS VENTILATION

Plastec Ventilation provides corrosion resistant fans, blowers and HVAC equipment that is specifically designed to resist the harsh environment created by chlorine usage. As chlorine fume extraction specialists, we have products specially designed to work in these sorts of environments.

Chlorine is an extremely volatile chemical used in natatoriums, swimming pools and water parks as a sanitizer, disinfectant and oxidizer. It is a highly corrosive gas that can deteriorate all kinds of material like steel (including Stainless Steel 316L). Keeping the pool user safe is a complex balance between treating the water with Chlorine without causing problems for health, hygiene, and equipment. Plastec’s corrosion-resistant fans/blower are designed to resist the harsh environment created

by chlorine and other corrosive chemicals used in natatoriums. The ventilation blowers below are specifically designed to offer the maximum amount of protection against chemicals and corrosion. Constructed from polypropylene, a thermal plastic, they are inherently corrosion, chlorine, UV, and humidity resistant. This makes Plastec fans – blowers an ideal solution for indoor pools, hot tubs, chlorine rooms, and other areas where chlorine chemical fumes may collect.

Air Exhaust

In The Pool Area

Without a properly designed ventilation system and at the contact of body fluids like sweat, Chlorine becomes Chloramine gas and tends to stagnate over the water surfaces if the ventilation is not correctly engineered.

Besides removing these toxic and corrosive chemicals, ASHRAE recommends to maintain the room at 0.05-0.15’’WC negative pressure and to adopt a minimum of 4-6 volumetric air changes per hour.

Can Chlorine Also Be Explosive Or Inflammable?

If Chlorine gas is stored with other chemicals, it can become extremely explosive. In that case, it is a necessity to exhaust the air from the room or storage compartment.

That’s why PLASTEC offers for ALL its blowers an XP option. All the polypropylene components are impregnated with carbon, which increases the electrical conductivity to avoid sparks. All motors mounted with blowers are XP as well. With our XP products, no need to use an expensive aluminum or Stainless Steel blower.

View All Natatorium Products

Plastec Ventilation Solution

With a 100% Polypropylene design. PLASTEC's corrosion-resistant blowers can resist the harsh environment created by chlorine and other corrosive chemicals used in natatoriums and other facilities with water presence.

Without any metal in the airstream, our Direct Drive Blowers are an

Ideal Solution For:

Surge Tank Systems

Aquatic Facilities

Water Parks

Chemical Storage Rooms

Indoor Pools

Hot Tubs

Chlorine Rooms

Spa

and other areas where chlorine chemical fumes may collect

PLASTEC VENTILATION GOT YOU COVERED!

Fast shipping and handling, receive your order quickly! PLASTEC does everything in its power to ensure that

equipment ships within 2 days!

Plastec 15 Direct Drive Forward Curve Polypropylene Blower

Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion.  Hindered-Amine Light Stabilizers (HALS) for increase UV resistance Plastec 15 Performance & Dimensional Specifications PDF Static Pressure Range: 0.1 to 2.4 WGFlow Range: 30 to 530 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V &a...

From $1,536.93

Plastec 20 Direct Drive Forward Curve Polypropylene Blower

Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion.  Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.6 to 6 WG Flow Range: 118 to 1060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...

From $1,863.71

Plastec 25 Direct Drive Forward Curve Polypropylene Blower

Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 25 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 8 WG Flow Range: 295 to 2060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...

From $2,549.19

Plastec 30 Direct Drive Forward Curve Polypropylene Blower

Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 30 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 3 WG Flow Range: 415 to 3120 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V ...

From $3,071.28

Plastec 35 Direct Drive Forward Curve Polypropylene Blower

Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Plastec 35 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 5.25 WG Flow Range: 1060 to 5885 CFM VFD Motors Option: Yes Phase and Voltage: Three 230...

From $6,607.19

Plastec 50 Direct Drive Forward Curve Polypropylene Blower

Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. The 3 phase 6 pole motors comes with a VFD and can meet explosive resistant applications. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Plastec 50 Performance & Dimensional Specifications PDF Static Pressure Range: 2.8 to...

$18,753.16

Jet 20 Inline Polypropylene Blower

Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood...

Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood,  drain plug and a disconnect.  Easy to install and is roof or wall mounted.  Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Jet 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.3 to 3.5 WG Flow Range: 300 to 800 CFM P...

From $3,557.63

Jet 25 Inline Polypropylene Blower

Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood...

Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood, drain plug and a disconnect.  Easy to install and is roof or wall mounted.  Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 25 Performance & Dimensional Specifications PDF Static Pressure Range: 0.75 to 8.25 WG Flow Range: 425 to 1000 CFM ...

From $4,462.67

Jet 30 Inline Polypropylene Blower

Jet 30 - This nicely packaged low noise unit as low at 77dB comes with an integrated weather hood...

Jet 30 - This nicely packaged low noise unit as low at 77dB comes with an integrated weather hood, drain plug and a disconnect.  Easy to install and is roof or wall mounted.  Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Jet 30 Performance & Dimensional Specifications PDF Static Pressure Range: 0.75 to 3 WG Flow Range: 1000 to 1800 CFM P...

From $5,326.86

Storm 10 High Static Pressure Direct Drive Forward Curve Polypropylene Blower

Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 10 Performance & Dimensional Specifications P...

From $1,275.26

Storm 12 High Static Pressure Direct Drive Forward Curve Polypropylene Blower

Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 12 Performance & Dimensional Specifications P...

From $1,681.17

Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower

Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 14 Performance & Dimensional Specifications P...

From $2,157.31

Storm 16 High Static Pressure Direct Drive Forward Curve Polypropylene Blower with high...

Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...

Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 16 Performance & Dimensional Specifications PDF Static Pressu...

From $3,744.03

Plastec 15 Direct Drive Forward Curve Polypropylene Blower - XP

Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion.  Hindered-Amine Light Stabilizers (HALS) for increase UV resistance Plastec 15 Performance & Dimensional Specifications PDF Static Pressure Range: 0.1 to 2.4 WGFlow Range: 30 to 530 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V &a...

From $3,597.21

Plastec 20 Direct Drive Forward Curve Polypropylene Blower - XP

Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion.  Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.6 to 6 WG Flow Range: 118 to 1060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...

From $3,940.58

Plastec 25 Direct Drive Forward Curve Polypropylene Blower - XP

Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 25 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 8 WG Flow Range: 295 to 2060 CFM VFD Motors Option: Yes Phase and Voltage: Single 115/230...

From $4,318.42

Plastec 30 Direct Drive Forward Curve Polypropylene Blower - XP

Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Plastec 30 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 3 WG Flow Range: 415 to 3120 CFMVFD Motors Option: YesPhase and Voltage: Single 115/230V ...

From $5,224.74

Plastec 35 Direct Drive Forward Curve Polypropylene Blower - XP

Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...

Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Plastec 35 Performance & Dimensional Specifications PDF  Static Pressure Range: 0.5 to 5.25 WG Flow Range: 1060 to 5885 CFM VFD Motors Option: Yes Phase and Voltage: Three 230...

From $10,815.81

Jet 20 Inline Polypropylene Blower - XP

Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood...

Jet 20 - This nicely packaged low noise unit as low at 64dB comes with an integrated weather hood,  drain plug and a disconnect.  Easy to install and is roof or wall mounted.  Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Jet 20 Performance & Dimensional Specifications PDF Static Pressure Range: 0.3 to 3.5 WG Flow Range: 300 to 800 CFM P...

From $5,857.50

Storm 16 High Static Pressure Direct Drive Forward Curve Polypropylene Blower with high...

Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...

Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 16 Performance & Dimensional Specifications PDF Static Pressu...

From $6,854.83

Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP

Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 14 Performance & Dimensional Specifications P...

From $4,065.68

Storm 12 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP

Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 12 Performance & Dimensional Specifications P...

From $3,604.86

Storm 10 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP

Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...

Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance.  Storm 10 Performance & Dimensional Specifications P...

From $2,792.11

ARE YOU

Designing a natatorium, indoor pool area
or chemical handling room?

Worried about the effects of
chlorine
on your HVAC system?

Is your current ventilation system designed
to ventilate chlorine fumes?

Concerned about providing and acceptable
environment for your occupants and guests?

Building a natatorium, chlorine room, indoor
pool or chemical room?

Need help choosing the right blowers and
fans for your indoor pool area?

Tired of routinely replacing corroded
blowers and fan equipment?

?

IF YOU ANSWERED YES TO ANY OF THE ABOVE QUESTIONS,,
THEN PLEASE REACH OUT TO US,, CONTACT PAGE.

PLASTEC VENTILATION IS AMCA CERTIFIED FOR SOUND & AIR SINCE 2021

More Than 1000+ Customers in 80+ Countries

Leader in Anti-Corrosive Fans with 50 Years of Experience

In-Stock Systems that Ship within 2 Days

Expert Customer Support and Maintenance