It appears that your cart is currently empty
Products
Impellers, Stainless Steel Material of Construction: Made of 304 Stainless Steel and compatible w...
Impellers, Stainless Steel Material of Construction: Made of 304 Stainless Steel and compatible with Plastec 20,25,30 & 35 and Jet 20, 25 & 30. Temperature limitation: 180ºF constant and up to 200ºF for short periods of time. Application: Designed for higher temperature applications where specified and required. Features and Benefits: High efficiency forward curved impeller Rated up to 3600 RPM where specified Shall be suitable for higher temperatures where polypropylene may not b...
Polypropylene high-density UV treated weather stack system with beveled end socket and seamless c...
Polypropylene high-density UV treated weather stack system with beveled end socket and seamless construction. FEATURES Polypropylene high-density UV treated weather stack system with beveled end socket and seamless construction. Color: Grey Material of construction: Polypropylene. Design to mount directly on PLASTEC Ventilation blowers. Seamless construction Corrosion resistant Light weight Max height 1.52m (5ft) each stack Stackable capability to reach 10ft or higher Capability to add a Di...
From $747.00
Material of Construction: Body, damper plate and shaft is made of PVC. Locking quadrant and faste...
Material of Construction: Body, damper plate and shaft is made of PVC. Locking quadrant and fasteners shall be made of stainless steel. Temperature Limitation: Adjustable Damper recommended up to 140º F. Application: Designed to operate in ducting where highly corrosive air is present.Designed to fit round schedule 40 PVC ducting or other constructionmaterials as specified by the dimensions listed for each model damper. Features and Benefits: All internal parts are plastic Furnished with lo...
From $189.75
Aluminum Weather Hood Enclosed Pedestal
Model WH5: Aluminum Weather Hood Enclosed Pedestal, Gray Color compatible with all blowers. Mater...
Model WH5: Aluminum Weather Hood Enclosed Pedestal, Gray Color compatible with all blowers. Material of Construction and Temperature Limitation: Gray powder coat finish, 0.125" cast aluminum, type 5052 H32 aluminum. All assembly hardware is stainless steel. The temperature limitation is 400º F. Application: Provides an attractive and user-friendly weather hood and fan/motor support pedestal for outside applications. Features and Benefits: Corrosion-resistant gray powder coat finish Attractiv...
$1,965.81
Back Draft Dampers, Vertical Gravity PVC
Material of Construction: Body, damper plate and shaft is made of PVC. Temperature Limitation: B...
Material of Construction: Body, damper plate and shaft is made of PVC. Temperature Limitation: Back Draft Damper recommended up to 140° F. Application: Designed to operate in ducting where highly corrosive air is present. Designed to fit round schedule 40 PVC ducting or other construction materials as specified by the dimensions listed for each model damper. Features and Benefits: All internal parts are plastic Can be installed vertically only Has bell end sockets and a minimum socket dept...
From $161.00
CAPTUR E-SEAT Communicating Fume Hood Controller
Introducing PLASTEC's CAPTUR E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood ap...
Introducing PLASTEC's CAPTUR E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood applications. PLASTEC's CAPTUR E-SEAT is designed for complete management of your laboratory with multiple extraction points and to ensure the safety of both the users and equipment. The CAPTUR collects data from PLASTEC's L.COM and CONTROL Fume Hood Controllers through the onboard MODBUS connection and continuously aggregates the flow rates from each unit to output two 0-10V signals, allowing for...
$1,552.50
Carbon Impregnated Polypropylene Impellers
CW = Clockwise CCW= Counter Clockwise
CW = Clockwise CCW= Counter Clockwise
CAV and VAV Fume Hood Controllers
Introducing PLASTEC's Constant and Variable Air Volume controllers. Designed for Fume Hood applic...
Introducing PLASTEC's Constant and Variable Air Volume controllers. Designed for Fume Hood applications. The advanced Constant Air Volume (CAV) controller is equipped with a speed sensor, which continuously monitors the face velocity of the sash opening. This ensures that the airflow remains optimal at all times. If any malfunction or insufficient airflow is detected, the CAV controller immediately notifies the user through audible and visual alarms.The CAV controller's digital seven-segmen...
From $603.75
CONTROL E-SEAT Communicating Fume Hood Controller
Introducing PLASTEC's CONTROL E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood a...
Introducing PLASTEC's CONTROL E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood applications. The CONTROL E-SEAT is the perfect solution for your fume hood control. The CONTROL E-SEAT is a multi-mode flow controller designed with fume hoods in mind. The included air speed sensor measures the air velocity and sounds an audible and visual alarm when the speed is too low. The optional sash position sensor measures the height of the sash and precisely manages the air flow accord...
$1,265.00
0/10V Dial Potentiometer with a dial to increase/decrease fan RPM when used with a VFD or any dev...
0/10V Dial Potentiometer with a dial to increase/decrease fan RPM when used with a VFD or any device that works with a 0/10V Signal. When paired with PLASTEC's pre-programmed VFDs, you can easily adjust your blower's flow with just a turn of the dial. Features: The potentiometer features an ON/OFF function when switching from "0" to "1" Comes with 7.5ft of cable, allowing for the potentiometer to be mounted in the most convenient location Color coded wires for easy installation and wiring Wh...
$187.69
Disconnect Switch Indoor Outdoor, NEMA4X - 25 AMPS, 3 Phase or 1 Phase
Blower Switch with Lockout - Tagout Switch Submittal Data/Specifications
Blower Switch with Lockout - Tagout Switch Submittal Data/Specifications
$311.66