Contact us
800-407-4294
It appears that your cart is currently empty
Products
Jet 30 Inline Polypropylene Blower
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood...
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 30 Performance & Dimensional Specifications PDF
Jet 30 Inline Polypropylene Blower - XP
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood...
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Jet 30 Performance & Dimensional Specifications PDF
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block hou...
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block housing (no welded joints), UV-treated, forward-curved polypropylene impeller, electronically and dynamically balanced. AMCA certified. Available in explosion-resistant version (NEC 500/505, ATEX Ex II 3G Ex c IIC T4). EC motor technology for improved energy efficiency and variable-speed control. Compact anti-corrosion fan for smaller-volume vapor, corrosive gas and toxic fume extraction. Airflow ran...
119-630 CFM
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block hou...
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block housing (no welded joints), UV-treated, forward-curved polypropylene impeller, electronically and dynamically balanced. AMCA certified. Available in explosion-resistant version (NEC 500/505, ATEX Ex II 3G Ex c IIC T4). EC motor technology for improved energy efficiency and variable-speed control. Mid-range anti-corrosion fan built for higher static pressure applications. Airflow range: 425 to 1,000 C...
178-1370 CFM
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block hou...
Anti-corrosion fans for vapor, corrosive gas and toxic extraction. Polypropylene single-block housing (no welded joints), UV-treated, forward-curved polypropylene impeller, electronically and dynamically balanced. AMCA certified. Available in explosion-resistant version (NEC 500/505, ATEX Ex II 3G Ex c IIC T4). EC motor technology for improved energy efficiency and variable-speed control. Highest-capacity fan in the JET EC line, for larger-volume extraction needs. Airflow range: 1,000 to 1,80...
384-2700 CFM
Single-block polypropylene housing for the JET Series, engineered for high corrosion resistance i...
Single-block polypropylene housing for the JET Series, engineered for high corrosion resistance in vapor, corrosive gas, and toxic fume extraction. UV-treated, welded-joint-free construction; available in explosion-resistant configurations (ATEX, NEC 500/505).
The PLASTEC KUBE is a modular polypropylene manifold system that connects multiple PLASTEC 50 cen...
The PLASTEC KUBE is a modular polypropylene manifold system that connects multiple PLASTEC 50 centrifugal fans into a single rooftop unit. Start with one KUBE module — up to 4 fans — and expand by adding modules as your flow requirements grow. All-polypropylene construction, high-velocity discharge, no coatings.
L.COM E-SEAT Communicating Fume Hood Controller
Introducing PLASTEC's L.COM E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood app...
Introducing PLASTEC's L.COM E-SEAT Communicating Fume Hood Controller. Designed for Fume Hood applications. PLASTEC's L.COM E-SEAT is designed for multi-device control for your lab. The L.COM E-SEAT is a multi-rate controller with On/Off functionality for up to three devices, whether those be a fume hood, motorized damper, or snorkel arm. The L.COM has functionality for up to 3 devices or stations. It has the ability to set the desired flow rate for each of those devices and will output a 0...
Motor Plates for Plastec 15–35 & Storm 10–16 Series Fans
Polypropylene motor mounting plates for PLASTEC, ROOF, JET, and STORM series fans. Provide secure...
Polypropylene motor mounting plates for PLASTEC, ROOF, JET, and STORM series fans. Provide secure motor positioning and vibration isolation within the fan housing. Corrosion-resistant, UV-treated construction matching the fan's exposure requirements.
Motor Support Stand in 304 Stainless Steel
Material of Construction and Temperature Limitation: 304 stainless steel and stainless steel asse...
Material of Construction and Temperature Limitation: 304 stainless steel and stainless steel assembly hardware.Temperature limitation is 200º F. Application: Provides attractive corrosion resistant motor and blower support standfor outside installation of Plastec Utility Blowers, STORM Series UtilityBlowers. Features and Benefits: 304 stainless steel and stainless steel mounting hardware Corrosion-resistant Integral securing mounting flanges with pre-drilled holes for securing Stainless Ste...
Motor Support Stand in Pickled Steel
Mounting Bracket (MB) Material of Construction: Body is made of pickled steel with hammered black...
Mounting Bracket (MB) Material of Construction: Body is made of pickled steel with hammered black paint finish. Application: Provides rigid support of motor and blower. Provides flange withpre-punched holes for securing to rigid support to help prevent vibration.MB15 through MB35 for inside use. Features and Benefits: Attractive Design Easy to install Motor mounting hardware supplied is stainless steel Strong, durable and rust-resistant Model MB35 has support bracket Mounting Bracket (MB) ...
O-Ring Gaskets for Industrial Ventilation Applications
Polypropylene O-ring gaskets designed for airtight sealing between housing sections on PLASTEC, R...
Polypropylene O-ring gaskets designed for airtight sealing between housing sections on PLASTEC, ROOF, JET, and STORM series fans. Corrosion-resistant construction suited for aggressive chemical environments. Replacement part for routine maintenance — ensures continued containment of corrosive vapors and gases.
Create an account to access prices and shop online
Enjoy free shipping and delivery on all fans and blowers!
Create an account
Contact a consultant
Think our solutions are the right fit for your application but not sure which fan you need? We’re here to help!
Contact us
Need Support?
If you're evaluating a specific application or if there are any questions let us help.
Contact Us
