It appears that your cart is currently empty
FREE SHIPPING WITHIN THE US • REQUEST A FREE CONSULTATION >
Accessories
Stainless Steel band designed to safely secure a discharge stack for roof top installations. The ...
Stainless Steel band designed to safely secure a discharge stack for roof top installations. The ideal accessory to be used with PLASTEC's line-up of polypropylene stacks. Features: Constructed out of corrosion-resistant 304 stainless steel Tested for up to 300 lbs of tension per guywire Can be easily and safely secured to a stack with the pre-drilled mounting holes Anchor points for three guywires Available in multiple sizes, from STGB160 to STGB315, to match your stack diameter.Stack Guy...
From $100.34
SMD On/Off Motorized Damper Series
SMD On/Off Motorized Damper Series – A Vital Component for Efficient Air Management The SMD Serie...
SMD On/Off Motorized Damper Series – A Vital Component for Efficient Air Management The SMD Series of On/Off Motorized Dampers is the latest addition to our comprehensive ventilation solutions, crafted to enhance system performance with uncompromised precision and reliability. Designed for straightforward functionality, these dampers serve as an integral component in a variety of industrial applications. Key Features of the SMD Series: Robust Motor: Equipped with a Belimo motor, these dampe...
From $830.12
PMD Proportional Motorized Damper Series
Expand Your Ventilation Capabilities with the PMD Proportional Motorized Damper Series Elevate yo...
Expand Your Ventilation Capabilities with the PMD Proportional Motorized Damper Series Elevate your control over industrial ventilation with our PMD Series Motorized Dampers. Designed to complement and complete our robust range of ventilation and control solutions, these dampers bring enhanced precision to your systems, ensuring optimal environmental regulation. Seamless Integration and Reliable Operation Features: Power Input: Ready for integration with a 24V AC/DC power supply, our dampe...
From $830.12
High Velocity Discharge Nozzle
Polypropylene high velocity discharge exhaust nozzle optimized for plume height requirements resu...
Polypropylene high velocity discharge exhaust nozzle optimized for plume height requirements resulting in higher discharge momentum and displacing the chemicals high above the roof. Color: Gray Designed to avoid re-entry of corrosive and toxic fumes or gases into make-up air equipment, outside air louver intakes, or public areas. Available with optional 5ft stackable polypropylene stack system. Discharge Nozzle (SN) Submittal and Specifications
From $361.24
Polypropylene high-density UV treated weather stack system with beveled end socket and seamless c...
Polypropylene high-density UV treated weather stack system with beveled end socket and seamless construction. FEATURES Polypropylene high-density UV treated weather stack system with beveled end socket and seamless construction. Color: Grey Material of construction: Polypropylene. Design to mount directly on PLASTEC Ventilation blowers. Seamless construction Corrosion resistant Light weight Max height 1.52m (5ft) each stack Stackable capability to reach 10ft or higher Capability to add a Di...
From $747.00
Explosion Resistant Disconnect Switch Indoor Outdoor, NEMA7/9 - 30 AMPS, 3 Poles
Manual Controller Switch, NEMA 7/9 Enclosure, Size 3 Inch W X 4.25 Inch D X 5.875 Inch H, Current...
Manual Controller Switch, NEMA 7/9 Enclosure, Size 3 Inch W X 4.25 Inch D X 5.875 Inch H, Current Rating 30 Ampere, Voltage Rating 600 V; 3HP at 120 VAC, 7.5HP at 240 VAC, 10HP at 480 VAC, 20HP at 600 VAC HAZARDOUS LOCATIONS. CLASSI - GROUPS C, D,CLASS II - GROUPS E, F, G. 30 AMP, 600 VOLTS.
$1,874.51
Flexible PVC Reducers Couplings
Material of Construction: Couplings are made of flexible PVC and compression Clamps are made of s...
Material of Construction: Couplings are made of flexible PVC and compression Clamps are made of stainless steel. Temperature Limitations: Recommended up140º F Application: Designed to operate in highly corrosive environments. Provides coupling and transition from ducting to fan inlet and outlet. Features and Benefits:• Flexible PVC provides an excellent connection between fan and ducting• Corrosive resistant construction materials• Stretch/Compression Factor of 5% allows a snug fit to prevent...
From $17.26
Back Draft Dampers, Vertical Gravity PVC
Material of Construction: Body, damper plate and shaft is made of PVC. Temperature Limitation: B...
Material of Construction: Body, damper plate and shaft is made of PVC. Temperature Limitation: Back Draft Damper recommended up to 140° F. Application: Designed to operate in ducting where highly corrosive air is present. Designed to fit round schedule 40 PVC ducting or other construction materials as specified by the dimensions listed for each model damper. Features and Benefits: All internal parts are plastic Can be installed vertically only Has bell end sockets and a minimum socket dept...
From $161.00
Material of Construction: Body, damper plate and shaft is made of PVC. Locking quadrant and faste...
Material of Construction: Body, damper plate and shaft is made of PVC. Locking quadrant and fasteners shall be made of stainless steel. Temperature Limitation: Adjustable Damper recommended up to 140º F. Application: Designed to operate in ducting where highly corrosive air is present.Designed to fit round schedule 40 PVC ducting or other constructionmaterials as specified by the dimensions listed for each model damper. Features and Benefits: All internal parts are plastic Furnished with lo...
From $189.75
Inlet/Outlet Guards - Bird Screen
Exhaust Guard / Inlet Guard Material of Construction: Body and Protection Screen are made of Poly...
Exhaust Guard / Inlet Guard Material of Construction: Body and Protection Screen are made of Polypropylene. Temperature Limitation: Recommended up to 140º F. Application: Designed to protect from fans moving parts and prevent the entry of birds and animals. Mounting may be for fan Inlet and Outlet. Features and Benefits: May be applied to Fan Inlet or Outlet Corrosion Resistant UV Treated Exhaust Guard / Inlet Guard Submittal Data and Specifications
From $284.66
316 Stainless Steel Electro-Polished Impellers
Impellers, Elector-Polished 316 Stainless Steel Material of Construction: Made of Electro Polish ...
Impellers, Elector-Polished 316 Stainless Steel Material of Construction: Made of Electro Polish 316 Stainless Steel and compatible with Plastec Stainless Steel models 20 (Counter Clockwise), 20 (Clockwise), 35 (Counter Clockwise, Backward Incline) & 40 (Counter Clockwise, Backward Incline) Temperature Limitation: 180ºF constant and up to 200ºF for short periods of time. Application: Designed for higher temperature applications where specified and required. Features and Benefits: High ...
From $724.51
Impellers, Stainless Steel Material of Construction: Made of 304 Stainless Steel and compatible w...
Impellers, Stainless Steel Material of Construction: Made of 304 Stainless Steel and compatible with Plastec 20,25,30 & 35 and Jet 20, 25 & 30. Temperature limitation: 180ºF constant and up to 200ºF for short periods of time. Application: Designed for higher temperature applications where specified and required. Features and Benefits: High efficiency forward curved impeller Rated up to 3600 RPM where specified Shall be suitable for higher temperatures where polypropylene may not b...
From $1,075.26