Contact us
800-407-4294
It appears that your cart is currently empty
NATATORIUM & CHLORINE ROOMS VENTILATION
Plastec Ventilation provides corrosion resistant fans, blowers and HVAC equipment that is specifically designed to resist the harsh environment created by chlorine usage. As chlorine fume extraction specialists, we have products specially designed to work in these sorts of environments.
Chlorine is an extremely volatile chemical used in natatoriums, swimming pools and water parks as a sanitizer, disinfectant and oxidizer. It is a highly corrosive gas that can deteriorate all kinds of material like steel (including Stainless Steel 316L). Keeping the pool user safe is a complex balance between treating the water with Chlorine without causing problems for health, hygiene, and equipment. Plastec’s corrosion-resistant fans/blower are designed to resist the harsh environment created
by chlorine and other corrosive chemicals used in natatoriums. The ventilation blowers below are specifically designed to offer the maximum amount of protection against chemicals and corrosion. Constructed from polypropylene, a thermal plastic, they are inherently corrosion, chlorine, UV, and humidity resistant. This makes Plastec fans – blowers an ideal solution for indoor pools, hot tubs, chlorine rooms, and other areas where chlorine chemical fumes may collect.
Air Exhaust
In The Pool Area
Without a properly designed ventilation system and at the contact of body fluids like sweat, Chlorine becomes Chloramine gas and tends to stagnate over the water surfaces if the ventilation is not correctly engineered.
Besides removing these toxic and corrosive chemicals, ASHRAE recommends to maintain the room at 0.05-0.15’’WC negative pressure and to adopt a minimum of 4-6 volumetric air changes per hour.
Can Chlorine Also Be Explosive Or Inflammable?
If Chlorine gas is stored with other chemicals, it can become extremely explosive. In that case, it is a necessity to exhaust the air from the room or storage compartment.
That’s why PLASTEC offers for ALL its blowers an XP option. All the polypropylene components are impregnated with carbon, which increases the electrical conductivity to avoid sparks. All motors mounted with blowers are XP as well. With our XP products, no need to use an expensive aluminum or Stainless Steel blower.
View All Natatorium Products
Plastec Ventilation Solution
With a 100% Polypropylene design. PLASTEC's corrosion-resistant blowers can resist the harsh environment created by chlorine and other corrosive chemicals used in natatoriums and other facilities with water presence.
Without any metal in the airstream, our Direct Drive Blowers are an
Ideal Solution For:
Surge Tank Systems
Aquatic Facilities
Water Parks
Chemical Storage Rooms
Indoor Pools
Hot Tubs
Chlorine Rooms
Spa
and other areas where chlorine chemical fumes may collect
Plastec 15 Direct Drive Forward Curve Polypropylene Blower
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance Performance range: 11–600 CFM · 0.1–2.55 in. Wg static pressure · 0.25–0.5 HP Plastec 15 Performance & Dimensional Specifications PDF
Plastec 20 Direct Drive Forward Curve Polypropylene Blower
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 30–1,200 CFM · 0.15–5.8 in. Wg static pressure · 0.25–1.5 HP Plastec 20 Performance & Dimensional Specifications PDF
Plastec 25 Direct Drive Forward Curve Polypropylene Blower
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.25–4 HP Plastec 25 Performance & Dimensional Specifications PDF
Plastec 30 Direct Drive Forward Curve Polypropylene Blower
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP Plastec 30 Performance & Dimensional Specifications PDF
Plastec 35 Direct Drive Forward Curve Polypropylene Blower
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 2–10 HP Plastec 35 Performance & Dimensional Specifications PDF
Plastec 50 Direct Drive Forward Curve Polypropylene Blower
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. The 3 phase 6 pole motors comes with a VFD and can meet explosive resistant applications. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 1,155–10,800 CFM · 0.3–12 in. Wg static pressure · 5.5–10 HP Plastec 5...
Jet 20 Inline Polypropylene Blower
Jet 20 - This nicely packaged low noise unit as low as 64dB comes with an integrated weather hood...
Jet 20 - This nicely packaged low noise unit as low as 64dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 20 Performance & Dimensional Specifications PDF
Jet 25 Inline Polypropylene Blower
Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood...
Jet 25 - This nicely packaged low noise unit as low at 70dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 25 Performance & Dimensional Specifications PDF
Jet 30 Inline Polypropylene Blower
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood...
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Jet 30 Performance & Dimensional Specifications PDF
Storm 10 High Static Pressure Direct Drive Forward Curve Polypropylene Blower
Storm 10 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases f...
Storm 10 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 10–150 CFM · 0.05–2.4 in. Wg stat...
Storm 12 High Static Pressure Direct Drive Forward Curve Polypropylene Blower
Storm 12 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases f...
Storm 12 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 20–400 CFM · 0.07–4.86 in. Wg sta...
Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower
Storm 14 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases f...
Storm 14 - Available in single phase and 3 phase motors, this unit is designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 35–800 CFM · 0.1–8 in. Wg static ...
Storm 16 High Static Pressure Direct Drive Forward Curve Polypropylene Blower
Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...
Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 50–1,340 CFM · 0.1–12 in. Wg static pressure · 3 HP ...
Plastec 15 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 15 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance Performance range: 11–600 CFM · 0.1–2.55 in. Wg static pressure · 0.33–0.5 HP Plastec 15 Performance & Dimensional Specifications PDF
Plastec 20 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 20 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 30–1,200 CFM · 0.15–5.8 in. Wg static pressure · 0.33–1.5 HP Plastec 20 Performance & Dimensional Specifications PDF
Plastec 25 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.33–4 HP Plastec 25 Performance & Dimensional Specifications PDF
Plastec 30 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP Plastec 30 Performance & Dimensional Specifications PDF
Plastec 35 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 3–10 HP Plastec 35 Performance & Dimensional Specifications PDF
Jet 20 Inline Polypropylene Blower - XP
Jet 20 - This nicely packaged low noise unit as low as 64dB comes with an integrated weather hood...
Jet 20 - This nicely packaged low noise unit as low as 64dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Jet 20 Performance & Dimensional Specifications PDF
Storm 16 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP
Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...
Storm 16 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 180–1,340 CFM · 0.1–12 in. Wg static pressure · 3–4 ...
Storm 14 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP
Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...
Storm 14 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 35–800 CFM · 0.1–8 in. Wg static pr...
Storm 12 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP
Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...
Storm 12 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 20–400 CFM · 0.07–4.86 in. Wg stati...
Storm 10 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP
Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from...
Storm 10 - Available in single phase and 3 phase motors, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in chemical cabinets, water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 10–150 CFM · 0.05–2.4 in. Wg static...
Storm 18 High Static Pressure Direct Drive Forward Curve Polypropylene Blower
Storm 18 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...
Storm 18 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 800–3,000 CFM · 8–18.5 in. Wg static pressure · 10 HP Storm 18 Performa...
Plastec 50 Direct Drive Forward Curve Polypropylene Blower - XP
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, c...
Plastec 50 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. The 3 phase 6 pole motors comes with a VFD and can meet explosive resistant applications. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 1,155–10,800 CFM · 0.3–12 in. Wg static pressure · 5.5–10 HP Plastec ...
Jet 25 Inline Polypropylene Blower - XP
Jet 25 - This nicely packaged low noise unit as low as 70dB comes with an integrated weather hood...
Jet 25 - This nicely packaged low noise unit as low as 70dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Jet 25 Performance & Dimensional Specifications PDF
Jet 30 Inline Polypropylene Blower - XP
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood...
Jet 30 - This nicely packaged low noise unit as low as 77dB comes with an integrated weather hood, drain plug, and a disconnect. Easy to install and is roof or wall mounted. Common applications are fume cabinet exhaust, water treatment, tank exhausts, and marine and salty environments as well as others. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Jet 30 Performance & Dimensional Specifications PDF
Storm 18 High Static Pressure Direct Drive Forward Curve Polypropylene Blower - XP
Storm 18 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive envir...
Storm 18 - Available in a 3 phase motor, this unit designed to exhaust gases from corrosive environments, this fan is primarily used in water treatment, scrubbers, chemical plants, industrial exhaust and other applications. This efficiently packaged all-polypropylene construction provides maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 800–3,000 CFM · 8–18.5 in. Wg static pressure · 10 HP Storm 18 Perform...
V 25 High Plume Laboratory Exhaust Blower
V 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.25–4 HP V 25 Performance & Dimensional Specifications PDF
100-2100 CFM
R 15 Direct Drive Forward Curve Roof Mounted Polypropylene Blower
R Unit 15 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 15 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increase UV resistance. Performance range: 11–600 CFM · 0.1–2.55 in. Wg static pressure · 0.25–0.5 HP Features and Benef...
11-600 CFM
R 15 Direct Drive Forward Curve Roof Mounted Polypropylene Blower - XP
R Unit 15 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 15 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increased UV resistance. Performance range: 11–600 CFM · 0.1–2.55 in. Wg static pressure · 0.33–0.5 HP Features and Bene...
11-600 CFM
R 20 Direct Drive Forward Curve Roof Mounted Polypropylene Blower
R Unit 20 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 20 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increase UV resistance. Performance range: 30–1,200 CFM · 0.15–5.8 in. Wg static pressure · 0.25–1.5 HP Features and Ben...
30-1200 CFM
R 20 Direct Drive Forward Curve Roof Mounted Polypropylene Blower - XP
R Unit 20 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 20 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increased UV resistance. Performance range: 30–1,200 CFM · 0.15–5.8 in. Wg static pressure · 0.33–1.5 HP Features and Be...
30-1200 CFM
R 25 Direct Drive Forward Curve Roof Mounted Polypropylene Blower
R Unit 25 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 25 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increase UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.25–4 HP Features and Benefi...
100-2100 CFM
R 25 Direct Drive Forward Curve Roof Mounted Polypropylene Blower - XP
R Unit 25 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 25 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increased UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.33–4 HP Features and Benef...
100-2100 CFM
R 30 Direct Drive Forward Curve Roof Mounted Polypropylene Blower
R Unit 30 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 30 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increase UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP Features and Ben...
270-3400 CFM
R 30 Direct Drive Forward Curve Roof Mounted Polypropylene Blower - XP
R Unit 30 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 30 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increased UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP Features and Be...
270-3400 CFM
R 35 Direct Drive Forward Curve Roof Mounted Polypropylene Blower
R Unit 35 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 35 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increase UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 2–10 HP Features and Benefi...
500-6400 CFM
R 35 Direct Drive Forward Curve Roof Mounted Polypropylene Blower - XP
R Unit 35 - The perfect solution for roof mounted applications, designed to exhaust fumes from or...
R Unit 35 - The perfect solution for roof mounted applications, designed to exhaust fumes from or in highly corrosive environments, such as coastal environments, chemical plants, natatoriums, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) mixed with the polypropylene for increased UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 3–10 HP Features and Benef...
500-6400 CFM
V 30 High Plume Laboratory Exhaust Blower
V 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP V 30 Performance & Dimensional Specifications PDF
270-3400 CFM
V 35 High Plume Laboratory Exhaust Blower
V 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increase UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 2–10 HP V 35 Performance & Dimensional Specifications PDF
500-6400 CFM
V 25 High Plume Laboratory Exhaust Blower - XP
V 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 25 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 100–2,100 CFM · 0.25–8 in. Wg static pressure · 0.5–4 HP V 25 Performance & Dimensional Specifications PDF
100-2100 CFM
V 30 High Plume Laboratory Exhaust Blower - XP
V 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 30 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 270–3,400 CFM · 0.3–3.1 in. Wg static pressure · 0.75–1.5 HP V 30 Performance & Dimensional Specifications PDF
270-3400 CFM
V 35 High Plume Laboratory Exhaust Blower - XP
V 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemica...
V 35 - Designed to exhaust fumes from highly corrosive environments such as laboratories, chemical plants, hospitals, universities, etc. The all-polypropylene construction and thick walls ensure maximum protection against acids and corrosion. Hindered-Amine Light Stabilizers (HALS) for increased UV resistance. Performance range: 500–6,400 CFM · 0.4–5.45 in. Wg static pressure · 3–10 HP V 35 Performance & Dimensional Specifications PDF
500-6400 CFM
The PLASTEC KUBE is a modular polypropylene manifold system that connects multiple PLASTEC 50 cen...
The PLASTEC KUBE is a modular polypropylene manifold system that connects multiple PLASTEC 50 centrifugal fans into a single rooftop unit. Start with one KUBE module — up to 4 fans — and expand by adding modules as your flow requirements grow. All-polypropylene construction, high-velocity discharge, no coatings.
ARE YOU
Designing A natatorium, indoor pool area
or chemical handling room?
Worried about the effects of
chlorine on your HVAC system?
Is your current ventilation system designed
to ventilate chlorine fumes?
Concerned about providing and acceptable
environment for your occupants and guests?
Building a natatorium, chlorine room, indoor
pool or chemical room?
Need help choosing the right blowers and
fans for your indoor pool area?
Tired of routinely replacing corroded
blowers and fan equipment?
?
IF YOU ANSWERED YES TO ANY OF THE ABOVE QUESTIONS,,
THEN PLEASE REACH OUT TO US,, CONTACT PAGE.
Contact a consultant
Think our solutions are the right fit for your application but not sure which fan you need? We’re here to help!
Contact us
Need Support?
If you're evaluating a specific application or if there are any questions let us help.
Contact Us
More than 1000+ customers in 80+ countries
Leader in anti-corrosive fans with 20 years of experience
In-stock systems that ship within 2 days
Expert customer support